Long Glass Fiber /LFT-G Production Line

I. The layout of this production line

The layout of this production line

II. Advantages of our company

1. The output of our machine is pretty high; For example: the output of NO.40 strips lft-g production line is up to 1.2 ton/hr.

2. The glass fiber content up to 65%;

3. The line speed is 60m/min;

4. No need to stop changing fibers, saving labor consumption;

5. The impregnation strength of each glass fiber can be adjusted individually;

6. The tractor can effectively traction multiple strips with a left-right swing mechanism to extend the life of the traction roller;

7. Electrical automation design, front and rear speed chain control;

8. Provide complete equipment production process solutions.

two

III. Applications

Long glass fiber reinforced thermoplastics (long glass fiber reinforced thermoplastics, LFT) is a rapid development in recent years to get a kind of high performance composite materials, compared with the short glass fiber reinforced thermoplastics, LFT has the following advantages: high strength, stiffness, bending strength, tensile strength, etc.; High temperature resistant, good low temperature resistance, especially suitable for use in high and low temperature alternating frequent occasions; High dimensional stability; In normal injection molding machine for injection molding, and also can be moulded; Low warping, the surface is bright and clean. Due to the outstanding mechanical properties and thermal properties, LFT in auto, machinery, sports, aerospace and other fields are widely used. So the LFT to promote the development of the composite material and extending the application of glass fiber reinforced composite materials in industry, has important research significance and commercial value.

LFT of lightweight, high strength material also has small bulk, few auto parts production scale to large quantity, wide range of auto parts production, gradually becoming the mainstream of the production of auto parts material, especially in the field of the high mechanical strength requirements, such as front-end collision avoidance framework, energy absorption bumper, seat frame, body bottom plate, etc.

1. New energy vehicles or into glass fiber demand strong point in the future;

2. Construction industry is a traditional glass fiber application field.

four
three

Post time: Mar-14-2022